Quick answer
AN, MS and NAS are the three main part-numbering systems for US aerospace and military fasteners. Each part number encodes the standard, size, length and options, but each family uses its own format. Component Solutions Group (CSG), a Bufab company and AS9120 Rev B distributor, supplies this hardware to OEMs.
In February 2026, the UK Serious Fraud Office secured a prison sentence for the director of AOG Technics, a parts broker that sold over 60,000 aircraft engine parts worth £6.9 million with forged Authorised Release Certificates between January 2019 and July 2023. Planes in the UK and across the world were grounded, with an estimated loss of over £39.3 million for airlines and manufacturers.
Forged paperwork is one way bad hardware reaches a build. A misread part number is another. OEM procurement teams spend more time verifying aerospace hardware callouts and mil-spec cross-references than the parts’ value justifies, partly because AN, MS and NAS part numbers do not follow one consistent format.
One character changes the part. On an AN bolt, an “A” at the end means the shank is not drilled for a cotter pin. Miss it, and the wrong bolt reaches the line.
Where Buyers Go Wrong With AN, MS and NAS Callouts
- Reading every family with one set of rules. AN, MS and NAS each encode size, length and options differently.
- Treating the AN dash number as a measured length. It is a length code, so check the size chart for that diameter.
- Missing a single suffix letter that changes the drilling or the material.
- Ordering a superseded number without checking which document governs the part today.
- Loading a legacy AN or MS number into the ERP or MRP system as a new item when its successor is already on file. The result is two item records, two stock counts and split purchase history for one part.
- Buying legacy AN and MS hardware from one vendor and NAS parts from another. Every extra vendor adds quotes, certification checks and receiving inspections to the same bill of materials.
- Accepting hardware without a certificate of conformance and traceability to the manufacturer. Without them, nothing proves where a part came from, and forged release paperwork in the AOG Technics case grounded aircraft.
How CSG Supplies This
Component Solutions Group (CSG) is an engineered solutions partner and fastener distributor for OEMs, not a commodity broker. As a Bufab company, CSG sources through a network of 1,600+ suppliers across 30+ countries. Services include vendor-managed inventory (VMI), kitting and design-assist engineering built around lower total cost of ownership (TCO). One source for legacy AN and MS hardware and current NAS parts cuts the vendor count on a mixed-spec bill of materials.
CSG holds AS9120 Rev B for aerospace distribution and ISO 9001:2015 for quality management, with a 99.9% order accuracy rate. Authorized lines include BUMAX, Böllhoff, HellermannTyton, ITW Nexus, Sherex and Southco.
The Organizations Behind AN, MS and NAS Standards
AN stands for Army-Navy. AN is the oldest of the three systems, dating mostly to the World War II era. Many AN numbers were superseded by MS equivalents decades ago. Some AN hardware has no MS successor and is still bought under its AN number.
MS stands for Military Standard. The Department of Defense maintains MS standards, and most MS numbers carry five digits.
NAS stands for National Aerospace Standard. The Aerospace Industries Association (AIA) maintains NAS, not the Department of Defense. NAS documents cover many higher strength grades, closer tolerances and configurations that AN and MS do not address. Because the three families grew up separately, accurate fastener callout reading matters on every order.
| Standard Family | Maintained By | What to Know | Example Part Numbers |
|---|---|---|---|
| AN (Army-Navy) | Army and Navy, World War II era | Oldest family; many numbers superseded by MS, some still bought as AN | AN3-5A, AN960-10 |
| MS (Military Standard) | Department of Defense | Most numbers are five digits; dash rules vary by base part | MS21042L3, MS35338-42 |
| NAS (National Aerospace Standard) | Aerospace Industries Association | Many higher strength grades and closer tolerances; longer strings | NAS1149FN832P |
How to Decode an AN Part Number
The AN bolt format is ANd(H)-g(A). Each element has one job:
- d: bolt diameter in sixteenths of an inch.
- H: head drilled for safety wire. No H means an undrilled head.
- g: the length dash number. Grip lengths run in 1/8-inch steps.
- A: shank not drilled for a cotter pin. No A means a drilled shank.
So AN4-15A is a 1/4-28 bolt with an undrilled head and an undrilled shank. The number after AN sets the diameter: AN3 is 3/16 inch with a 10-32 thread, AN4 is 1/4-28, AN5 is 5/16-24, AN6 is 3/8-24, AN7 is 7/16-20 and AN8 is 1/2-20.
How to Decode an MS Part Number
MS part numbers start with the MS prefix and a base number, such as MS21042 for a nut or MS35338 for a lock washer. A dash number or suffix follows. Its meaning depends on the base part.
On an MS21042 nut, the dash number indicates thread size. On washers, it relates to the bolt size the washer fits. MS rules are not uniform across the catalog, so read every suffix against the specification sheet for that base number.
How to Decode a NAS Fastener
NAS part numbers pack more information into the string than AN or MS numbers. A callout such as NAS1149FN832P carries the base standard plus several coded options.
The base number points to a specific NAS document. That document sets the material, dimensions, finish and test requirements. Source the part to that exact document, especially on aerospace and aviation programs that require AS9120 Rev B distributors and full traceability.
What Dash Numbers and Suffix Letters Mean on AN Bolts
AN bolt dash numbers skip from -7 straight to -10. That jump makes the dash number look like inches plus eighths. Pegasus Auto Racing calls that reading a popular misconception. Read length and grip from the size chart for that diameter.
Grip is the unthreaded portion of the shank. Thread length is constant for each bolt diameter. It is sized for one AN960 flat washer under the head, a full-height AN365 or AN310 nut and one AN960 flat washer under the nut.
Letters also set the material. Per Experimental Aircraft Info, no letter means cadmium-plated nickel alloy steel, with a cross or asterisk on the head. “C” means corrosion-resistant steel, marked with a single dash. “DD” means 2024-T3 aluminum alloy, marked with two dashes.
Supersession: From AN to MS to NASM
Many AN numbers were superseded by MS equivalents. The process continued: working with the Department of Defense, the AIA has converted over 500 MIL-specs to NAS documents carrying an NASM (inch) or NAM (metric) prefix, and the standard continues to be procured to the MS part number.
In many cases the part is still ordered by its MS number while the governing document carries the NASM designation. When a legacy drawing calls an AN or MS number, confirm which document governs the part today before you order. Then record the successor as a mil-spec fastener cross-reference on the existing ERP item, not as a new item number, so one part keeps one stock record.
Commercial Fasteners vs Aerospace Callouts
A commercial bolt with the same thread is not an AN, MS or NAS part. The callout points to a document that sets material, dimensions, finish and testing. A substitute that skips those requirements is non-conforming hardware.
Never substitute without engineering approval. For grades, materials and governing specs, see our guide to aerospace fasteners and materials.
Essential Documentation for Aerospace Buyers
Ask every distributor for a certificate of conformance and traceability to the manufacturer. Hardware without them has no proven origin, and that gap is how counterfeit parts enter a build.
Confirm your supplier maintains full aerospace fastener traceability. Check its certifications too. CSG publishes its AS9120 Rev B and ISO 9001:2015 certificates on its awards and certifications page.
Get Your AN, MS and NAS Callouts Checked Before the Next Production Run
Work with a distributor that reads callouts the way your engineers do. Look for AS9120 Rev B certification, material test reports and traceability to the manufacturer. A misread part number turns into rejected assemblies and line downtime.
Send your drawings and part numbers to Component Solutions Group. Contact our OEM team for spec-compliant hardware on your next production run.
Frequently Asked Questions (FAQs)
What is the main difference between AN, MS and NAS fasteners?
The difference is the organization behind the document. AN (Army-Navy) is the oldest family, from the World War II era. The Department of Defense maintains MS (Military Standard), and the Aerospace Industries Association maintains NAS (National Aerospace Standard). NAS documents cover many higher strength grades and closer tolerances.
Are AN and MS fasteners interchangeable?
Not without engineering approval. An MS part often supersedes an AN part, but the newer document sets its own tolerances, material and finish. Check the governing document against your drawing before you swap.
What does the letter C mean on an AN bolt?
C means the bolt is corrosion-resistant steel. You can spot it by the single dash on the head.
Why do AN bolt dash numbers skip from -7 to -10?
The numbering follows an inch-plus-eighths pattern, so it jumps from -7 to -10. That pattern does not mean the dash number equals the shank length. Read the actual length for that diameter from the AN size chart.
How do I verify the grip length of an AN bolt?
Use the size chart for the bolt’s diameter, not the dash number alone. Grip is the unthreaded portion of the shank and runs in 1/8-inch steps. For MS and NAS parts, read grip from the specification sheet.
What documentation is required to verify NAS, MS and AN fastener compliance?
Your purchase order and quality clauses set the exact requirements. On every order, ask for a certificate of conformance and traceability to the manufacturer. CSG holds AS9120 Rev B for aerospace distribution.

