Interactive tool

Cost of a Defect Calculator: Bad Parts Cost More Every Meter They Travel

The same defective washer costs a few minutes at goods in, a stopped cell on the line, and a quality event at your customer. The PPM number is the same in all three cases. Nothing else is.

Live cost model

Set Your PPM Defect Rate and Catch Rates

Enter pieces received, incoming defect rate and where defects are caught, and the annual cost by stage updates immediately.

… a year, at your defect rate

 

Your numbers

Total parts received across all part numbers.
CSG’s own benchmark: top suppliers run single-digit PPM, fewer than ten bad parts per million received.

Of the defects that arrive, where do you catch them?

Whatever survives both reaches your customer.

The defaults follow the 1-10-100 rule: the cost of a defect multiplies roughly tenfold at each stage it escapes. A widely used quality heuristic, not a law, all three are editable, and yours will differ.

Defects arriving

…

…

Reaching your customer

…

…

At single-digit PPM

…

…

Cost by where it is caught

Catching more at goods-in moves cost left along this bar. Getting fewer bad parts in the first place removes the bar.

Sorting is the symptom, not the cure

…

How this is calculated
  • defects = pieces received × PPM / 1,000,000
  • caught at goods-in = defects × goods-in catch rate
  • caught on the line = remainder × line catch rate
  • escaped = everything left

Each is multiplied by its own cost per defect. The defaults are a 1-10-100 ladder ($4 / $40 / $400), which is a heuristic for the shape of the escalation rather than a measured figure for your plant, that is why all three are inputs.

Explore the tools

Every Number on This Site Is One You Can Move

Bin Replenishment Simulator

Demand, lead time and service level in, safety stock and a simulated run out.

Grade and Environment Selector

Environment and load in, the grades that survive the joint out.

Cost of an Escaped Defect

PPM and catch rates in, the cost of a quality escape out. You are here.

Now get the number that is missing

You Have a Number. Now Get the One That Is Missing.

Everything on this page is modelled from the figures you entered. The piece price, the lead time and the tooling are ours to quote, and they are the numbers that turn this from an estimate into a decision. Send us the part, or the problem, and we will come back with both.

Prefer to talk it through?