Space
Space Grade Fasteners for Launch Vehicles, Satellites and Test
CSG supplies space grade fasteners and C-parts to builders of launch vehicles, satellites, payloads and space test equipment, including BUMAX high-strength stainless, titanium, A-286 and nickel alloy hardware, vented and low-outgassing screws, non-magnetic fasteners and self-locking nuts. Orders run under CSG’s AS9120B quality system with ITAR registration and full lot traceability.
Certified quality
Registered
Product Portfolio
Space Grade Fasteners & Precision Hardware.
From BUMAX high-strength stainless and heat-resistant alloys to vented screws and self-locking nuts, CSG helps space hardware builders consolidate flight and ground hardware through one AS9120B-certified supply partner.
High-Strength Stainless
BUMAX High-Strength Stainless
BUMAX 88, 109 and Ultra bolts, screws, nuts and washers for joints that need strength and corrosion resistance together.
Heat Resistance
Heat-Resistant Alloy Fasteners
BUMAX HE, A-286 stainless and Inconel 718 hardware for propulsion and hot-zone joints.
Vacuum Service
Vented & Low-Outgassing Screws
Vented-head and through-hole screws plus vacuum-compatible materials for chambers and sealed volumes.
Low Permeability
Non-Magnetic Fasteners
Austenitic stainless, titanium, PEEK and ceramic hardware where magnetic interference must be kept low.
Weight Reduction
Titanium Fasteners
Ti-6Al-4V bolts, screws and nuts for weight-critical structures with moderate heat.
Retention & Locking
Self-Locking Nuts
All-metal prevailing-torque nuts, BUMAX Lock nuts and other locking hardware for vibration-loaded joints.
Thread Reinforcement
Threaded Inserts
HELICOIL wire thread inserts and key-locking inserts for strong, reusable threads in soft metals.
Beyond the Catalog
Custom & Engineered C-Parts
Made-to-print and special-material hardware sourced through CSG’s qualified supplier network.
Space grade fasteners by system
Spacecraft and satellite fasteners by application
Application
Launch Vehicle Structures
High-strength bolts, nuts, inserts and blind fasteners for structures where weight and strength both matter.
Application
Satellite & Payload Structures
BUMAX high-strength stainless, titanium and A-286 hardware for brackets, panels, mechanisms and instrument mounts.
Application
Thermal Vacuum & Test Chambers
Vented screws and low-outgassing, vacuum-compatible hardware for chambers, flanges and test fixtures.
Application
Avionics & Electronics Boxes
Enclosure hardware, standoffs, inserts and mounting fasteners for avionics boxes and electrical assemblies.
Application
Propulsion & Hot Zones
Heat-resistant fasteners such as BUMAX HE, A-286 and Inconel 718 for engine, exhaust and high-temperature areas.
Application
Ground Support & Integration
Mil-spec bolts, nuts, washers and kitted hardware for ground support equipment, integration fixtures and test stands.
Why space hardware builders choose CSG as a fastener supplier
CSG combines AS9120B-certified sourcing with engineering support, quality documentation and inventory programs to simplify the supply chain behind flight and ground hardware.
Engineering Support
Material, finish and joint support for strength, vacuum, magnetic and temperature requirements.
Global Sourcing (AS9120B + ITAR)
Qualified suppliers worldwide, backed by CSG’s certifications and the Bufab network.
Inventory Solutions
Programs that keep flight and ground hardware available without excess stock.
Quality & Documentation
AS9120B quality system with full traceability, certification management and documentation support.
What CSG's space support includes
Engineering Support:
- Material and finish evaluation
- Galling and preload review
- Specification cross-referencing
- Alternative source identification
Global Sourcing (AS9120B + ITAR):
- Bufab network of 1,600+ suppliers
- BUMAX from within the Bufab Group
- ITAR-compliant sourcing
- Multi-source risk mitigation
Inventory Solutions:
- Kitting and ship-set packaging
- Consignment programs
- Safety stock strategies
- Forecast-based replenishment
Quality & Documentation:
- Full lot traceability
- Material certs and test reports
- Certificates of conformance
- First article inspection support
What to specify for vacuum‑compatible fasteners and flight hardware
Spacecraft fasteners are selected for strength, clean behavior in vacuum, performance across temperature extremes and full traceability, and each requirement belongs on the drawing.
Vented and vacuum-compatible fasteners
CSG sources vented screws, low-outgassing hardware and vacuum-compatible fasteners for vacuum chamber and sub-atmospheric applications, in high-purity stainless steel, titanium and selected polymers such as PEEK and Vespel. Vented screws with through-holes or milled flats let trapped gas escape during pump-down, reducing virtual leaks. Define venting geometry, material grade and surface finish against the target vacuum level, and CSG sources to that definition.
Galling control with dry film lubricant
Galling happens when pressure and sliding friction strip the oxide layer from stainless threads and the bare surfaces fuse, and the risk rises with preload. A hardness differential, such as a 316 bolt in a Nitronic 60 nut, rolled threads and a pre-applied dry film lubricant keep friction consistent. Because a galling joint can signal target torque early, CSG’s design assist team reviews the pairing before the print is released.
Materials for temperature extremes
A-286 stainless and nickel-based superalloys such as Inconel 718 hold strength at temperatures that weaken alloy steel. BUMAX HE is rated for high strength and oxidation resistance up to 700°C, and BUMAX Ultra holds its strength from cryogenic conditions up to 600°C. Titanium Ti-6Al-4V suits weight-critical areas with moderate heat. Confirm the operating temperature, governing specification and required finish before quoting.
Traceability and counterfeit control
Aerospace traceability links each fastener lot to its material heat, manufacturing batch and test results. CSG sources from approved, vetted suppliers under its AS9120B quality system and keeps chain-of-custody documentation from material source to delivery, with serialized, tamper-evident packaging for applicable hardware. Ask for the certificate of conformance and material certs on receipt, and check that lot numbers match.
Handling for ITAR-controlled programs
CSG is ITAR registered and maintains procedures for handling controlled items, with access controls and NDA protection covering drawings and bills of material. DFARS origin documentation is available when specified. Specific compliance requirements should be discussed during quoting and onboarding, so documentation and handling are agreed before the first order.
Space grade fastener technical guide
Vented screws and outgassing, stainless steel galling, BUMAX grades, titanium and nickel alloys, non-magnetic hardware and traceability.
Vented Screws & Outgassing in Vacuum
Fasteners installed in vacuum chambers and sub-atmospheric environments must not trap gas in blind holes or outgas from surface contaminants, coatings or base materials. Vented screws with through-holes or milled flats allow trapped gas to escape during pump-down, reducing virtual leaks and improving vacuum quality.
Non-outgassing requirements add another layer, as some materials and surface treatments release volatile compounds under vacuum or elevated temperature. CSG can help evaluate material options, including passivated or electropolished stainless, titanium, PEEK and Vespel, against the combined magnetic, chemical and thermal requirements of the application.
Preventing Galling on Stainless Fasteners
Austenitic stainless grades such as 304 and 316 owe their corrosion resistance to a thin chromium oxide film. Tightening a dry fastener drives contact pressure up fast; the film breaks down under shear, and the clean surfaces bond. That bond starts as microscopic tearing and grows into full seizure within a few turns.
The most durable fix is a hardness differential between mating parts, such as a 316 bolt in a Nitronic 60 nut, followed by rolled threads and a controlled lubricant. The NASA Fastener Design Manual (RP-1228) notes that the friction coefficient can vary from 0.04 to 1.10 depending on materials and lubricants, which is why torque values must be tied to a defined friction condition.
BUMAX High-Strength Stainless Grades
BUMAX 88 and BUMAX 109 are premium A4 fasteners offered in two strength classes. BUMAX SDX 109 is a high strength super duplex fastener with strong resistance to crevice, pitting and stress corrosion, and BUMAX HE is rated for high strength and oxidation resistance at temperatures up to 700°C.
BUMAX Ultra reaches an ultimate tensile strength above 1,700 MPa, more than three times standard A4/316L stainless bolts, and holds its strength from cryogenic conditions up to 600°C. A payload systems engineer quoted on CSG’s BUMAX page credits strain hardening and rolled threads with a more reliable fastener that helps prevent galling.
Titanium, A-286 & Nickel Alloy Fasteners
Titanium alloys (Ti-6Al-4V), nickel-based superalloys (Inconel 718, Waspaloy), A-286 stainless and other high-performance materials are used where strength-to-weight ratio, temperature resistance or corrosion resistance exceeds the capability of standard alloy steel.
These materials require specialized manufacturing processes, testing and documentation. CSG sources titanium and high-temperature alloy fasteners through qualified aerospace suppliers, with full material traceability and certification to the applicable specification.
Non-Magnetic Hardware
Measurement and instrument systems can be sensitive to magnetic fields and require fasteners with very low magnetic permeability. Austenitic stainless steels, titanium, PEEK and ceramic materials can offer non-magnetic properties.
Selection should also account for strength, temperature capability, chemical resistance and dimensional stability, so CSG evaluates the full set of requirements rather than permeability alone.
Traceability, Counterfeit Prevention & ITAR
CSG’s AS9120B-certified quality system maintains material certifications, certificates of conformance, test reports and lot identification records and delivers them with every aerospace shipment. CSG sources from approved, vetted suppliers and keeps chain-of-custody documentation from material source to delivery.
CSG is ITAR registered. For ITAR-controlled parts, access controls and NDA protection cover drawings and bills of material, and DFARS origin documentation can be gathered when the contract calls for it.
Related Industries