Products
Standard Fasteners
Every commonly used specification, stocked, certified and available against a schedule rather than a promise.
The standard range is the backbone of most C-parts programs. It is also where consolidation pays fastest, because the same bolt is usually being bought at three sites under three part numbers from three suppliers. We stock across the common materials and finishes, and we supply with the material certification, dimensional report and test documentation that your quality system expects.
The Standard Fasteners CSG Supplies
CSG supplies standard fasteners in every commonly used specification: hex bolts and cap screws, socket head cap screws, machine and tapping screws, nuts and lock nuts, washers, and standoffs, in imperial and metric sizes. Parts ship with the material certification, dimensional report and test documentation your quality system expects, against a schedule rather than a promise. Where a standard part is close but not right, the customer-unique route picks it up.
- Grade 2, 5 and 8 plus metric 8.8, 10.9 and 12.9
- Carbon steel, stainless 304 / 316, alloy, brass, aluminum and nylon
- Consolidated under one supplier, backed by Bufab's network of 1,600+ suppliers
Bolts & screws
Bolts & screws
Structural and general purpose fastening, imperial and metric.
Hex bolts & cap screws
Grade 2, 5 and 8 plus metric 8.8, 10.9 and 12.9. Heavy hex, structural and flange variants with certification and test reports on request.
Socket head cap screws
Socket head, button head, flat head and shoulder screws in alloy and stainless, for high clamp load in a small head footprint.
Machine & tapping screws
Machine screws, thread forming and self-tapping screws for sheet, casting and plastic, in the full range of drive types.
Nuts, washers & standoffs
Nuts, washers & standoffs
Locking, load distribution, sealing and mechanical spacing.
Nuts & lock nuts
Hex, nylon insert, all-metal prevailing torque, flange and weld nuts, matched to the grade of the mating fastener.
Washers
Flat, lock, wave, belleville and bonded sealing washers in steel, stainless, brass and engineered plastics for corrosion resistance and load spread.
Standoffs & spacers
Precision standoffs for electronic assemblies and PCB mounting in aluminum, brass, stainless and nylon, with custom lengths and threading.
Featured product
Blind rivet nut, knurled body
Strong reusable threads in thin walled material, sheet metal and plastics, installed from one side where welding or tapping is not feasible.
An example of the level of detail every line item carries.
- Thread sizes M3 to M12 and #6-32 to 1/2-13
- Steel, stainless, aluminum
- Open and closed end, flat and countersunk head
Browse the Standard Range
Category pages for the parts on this page:
Send us your fastener list
A spreadsheet of part numbers and annual usage is enough for us to come back with a consolidated position.