We're currently making updates to enhance your experience. If you encounter any technical difficulties or can't find what you need, please contact us and we'll be happy to help. Thank you for your patience as we make these improvements to our site.
(937) 433-7200
contactus@componentsolutionsgroup.com
bufab-logo-white
EcoVadis Platinum medal, Top 1%, Sustainability Rating, October 2025
TIME World's Best Companies 2025, Sustainable Growth badge
We're currently making updates to enhance your experience. If you encounter any technical difficulties or can't find what you need, please contact us and we'll be happy to help. Thank you for your patience as we make these improvements to our site.

Berry Amendment Compliant Hardware for Military Buckles and Fasteners

Share:

Quick answer

Berry Amendment compliant hardware is grown, reprocessed, reused, or produced in the United States, as 10 U.S.C. 4862 requires for covered DoD items. A buckle falls under the rule when it is part of a covered belt or PSC 8465 gear. Component Solutions Group (CSG) distributes ITW Nexus military buckles; request certification for each part number.

A single foreign component in a covered assembly can fail a DoD audit, and the Berry Amendment allows no price-based waiver to fix it after the fact. The rule dates to its 1941 origins, prime contractors answer for every supplier tier beneath them, and buyers need to know exactly which textiles and clothing components it covers.

How CSG Supplies This

Component Solutions Group (CSG) is an industrial fastener distributor and supply chain partner for OEMs, headquartered in Dayton, Ohio. As a Bufab company, CSG draws on a network of 1,600+ suppliers in 30+ countries.

CSG does not make parts. It sources, stocks, and delivers them as an authorized supplier of ITW Nexus, BUMAX, Böllhoff (HeliCoil), HellermannTyton, Sherex, and Southco. Services include vendor managed inventory (VMI), consignment, kitting, C-parts management, design-assist engineering, and global sourcing.

CSG holds ISO 9001:2015 and AS9120 Rev B certifications and is ITAR registered. Its Automotive & Tier 1 division (A1) is IATF 16949 certified. CSG reports a 99.9 percent order accuracy rate.

The CSG military buckles page is titled “Military Grade Buckles and Tactical Hardware, Berry Compliant,” and it carries ITW Nexus hardware. Request part-level certification for each of the ITW Nexus products you specify to confirm domestic content before production.

What Is Berry Amendment Compliant?

The rule lives at 10 U.S.C. 4862, renumbered from 10 U.S.C. 2533a by Pub. L. 116-283. It bars the Department of Defense from buying covered items unless they are grown, reprocessed, reused, or produced in the United States.

Contracts enforce the statute through DFARS clause 252.225-7012 (APR 2022). Every delivered item must meet that domestic standard. The rule allows no price-based waiver and no waiver based on foreign-country trade agreements.

Why Is It Called the Berry Amendment?

The rule first passed in 1941 as part of the Fifth Supplemental Department of Defense Appropriations Act. It is named for Representative Ellis Yarnal Berry.

For decades, Congress renewed the restriction in annual defense appropriations bills. The FY2002 National Defense Authorization Act (NDAA) made it permanent law in December 2001.

What Items Does Berry Cover?

DFARS 225.7002-1 lists the covered items:

  • Food
  • Clothing and its normal components
  • Tents and tarpaulins
  • Cotton and other natural fiber products
  • Synthetic fabric, coated synthetic fabric, and canvas
  • Wool
  • PSC 8465 individual equipment made from those fibers
  • Hand tools and measuring tools

Trade.gov guidance states that clothing includes belts. A buckle that is a normal component of a covered belt or PSC 8465 gear sits inside the covered assembly. A lone buckle does not trigger the rule by itself.

Applicability is decided case by case, and it flows down every supplier tier. Specify Berry compliant tactical belt buckles by the end item they go into, not by the buckle alone.

Seven Risks in Sourcing Berry Amendment Compliant Tactical Hardware

These risks stack on each other. Most start with unclear requirements at the beginning of a program.

  1. Misreading end-item applicability. Teams struggle to decide whether a part goes into PSC 8465 gear or covered clothing. Leave that question open and design approval stalls.
  2. Missing flow-down. Prime contractors must carry the rule through every supplier tier. One noncompliant sub-tier supplier puts the whole delivery at risk, so DFARS flow-down traceability has to reach the raw material.
  3. Tracing material origin. Final assembly in the United States does not make a part compliant on its own. Buyers need origin data for the materials inside the part.
  4. Stale or unverifiable sub-tier certificates. A generic compliance letter, an expired certificate, or a document that does not match the part number leaves a gap. Check each certificate against the part, the lot, and the issuing supplier before the parts ship.
  5. Domestic cost swings on fixed-price contracts. Berry allows no price-based waiver, so a rise in domestic material cost cannot be offset by switching to a foreign source. Build that exposure into the quote and the purchase agreement.
  6. Records kept outside ERP and PLM systems. Certificates stored in email threads and shared drives slow audit response. Tie each certificate to its part number and lot in the ERP or PLM record so the file is ready when the contracting officer asks.
  7. Longer lead times. Stock pipeline inventory early to avoid line-down events.

Exceptions to the Berry Amendment

The law carves out a few exceptions. The small-purchase exception appears as two different figures, so read both.

DFARS 225.7002-2(a) excepts acquisitions not exceeding $200,000, except certain footwear. The statute at 10 U.S.C. 4862(h) sets $150,000 and bars splitting a larger buy into smaller orders to qualify. The statute sets a $10,000 limit for flags.

Confirm which figure governs your contract with the contracting officer. Other exceptions cover domestic non-availability and acquisitions in support of combat operations.

Requirement Berry Amendment Buy American Act (BAA) Trade Agreements Act (TAA)
Scope DoD-specific items (textiles, food, tools) General federal procurement Broad federal and GSA schedules
Waivers for Price None Allowed if domestic cost is unreasonable Not applicable
Foreign Equivalence None Not addressed here Allows designated countries
Transformation Abroad Prohibited Not addressed here Allowed (substantial transformation)

 

Berry vs Buy American Act

The Buy American Act is the general domestic preference law for federal purchases.

The Berry Amendment has no price waiver. A buyer cannot choose foreign hardware because the domestic part costs more. Berry also rejects foreign equivalence, so hardware from allied nations still fails.

Is Berry Compliant the Same as TAA Compliant?

No. The Trade Agreements Act (TAA) governs broader federal and General Services Administration (GSA) work. It accepts products substantially transformed in designated foreign countries.

Berry is DoD-only and stricter. TAA compliance does not satisfy Berry. Berry compliant tactical hardware must be domestic in origin and production unless a listed exception applies.

Berry vs DFARS 252.225-7009

DFARS 252.225-7009 restricts specialty metals, such as titanium and certain steel alloys. It rests on a separate statute from the textile and hand-tool rules at 10 U.S.C. 4862.

Apply the right rule to the right material. The CSG guides to military specification hardware and DFARS compliant fasteners cover each framework in detail.

How Buyers Verify Berry Compliant Hardware

What proves compliance? Verification starts with part-level supplier certification that confirms full domestic content. A facility-wide statement does not show where a specific part’s materials came from.

The record should trace material origin through every supplier tier. Ask your supply partner for lot-level traceability on all Berry compliant webbing and hardware, and keep it in the contract file.

Three Questions to Put to a Berry Compliant Supplier Before Award

Judge military component suppliers on documentation, not just stock levels. The right distributor knows DFARS flow-down and secures part-level certifications from the brands it represents. Put these three questions to every bidder before you award the work:

  • Can it certify each part number? A certificate per part number, not one letter per facility.
  • Can it trace material origin by lot? Lot records that reach through every sub-tier supplier to the raw material.
  • Can it hold pipeline stock for long-lead domestic parts? Inventory set aside so a domestic lead time does not stop your line.

A bidder that answers all three with documents is ready for tactical gear procurement on a DoD program. See how CSG supports military and defense programs.

Ready to source military buckles with Berry compliant documentation? Submit a request for quote and ask for part-level certification on every line item.

Frequently Asked Questions (FAQs)

Are metal buckles automatically covered by these regulations?

No. A lone buckle is not independently covered. It falls under the rule when it is a normal component of a covered item, such as a belt or PSC 8465 individual equipment.

How do defense contractors prove Berry Amendment compliance for components like ITW Nexus buckles?

They collect part-level certification confirming the materials were grown, reprocessed, reused, or produced in the United States. A general compliance statement is a thin record. Pair each certificate with lot-level traceability through every supplier tier, and keep both in the contract file.

How does the small purchase exception work for tactical gear?

The two sources state different figures. DFARS 225.7002-2(a) cites $200,000, while 10 U.S.C. 4862(h) sets $150,000 and bars splitting orders to qualify. Confirm the governing figure with your contracting officer.

What happens if domestic materials are temporarily unavailable?

DFARS 225.7002-2 lists an exception for covered items that cannot be acquired as and when needed in satisfactory quality and sufficient quantity at U.S. market prices. The government applies that exception, so raise it with your contracting officer before any foreign material is substituted.

Stay Informed

Get exclusive ebooks, resources, and industry insights from us every month.

  Thank you for Signing Up

Related Posts